Lantronix MPS100 Printer User Manual


 
C-1
C: Pinouts
C.1 Ethernet Connector
Figure C-1: RJ45 Ethernet Connector
C.2 Parallel Connectors
Lantronix uses standard Centronics parallel connectors.
For optimum performance of your MPS, Lantronix recommends the use of high quality
parallel cables. Choose one of the following:
A Lantronix parallel port cable, part number #500-011 (6 feet).
Any other brand of IEEE Std. 1284-1994 compliant cable. Compliant cables can
easily be identified by the permanent label “IEEE Std. 1284-1994 compliant”
printed on the cable.
Note: Non-compliant cables have the same type of connectors but different
electrical characteristics.
1 2 3 4 5 6 7 8
1 TX+
2 TX-
3 RX+
6 RX-