Filter
Top Products
2: Product Overview
XPress-Pro SW 94000 User Guide 10
LED State Indication
10/100TX or 100FX
Steady
A valid network connection established.
LNK stands for LINK.
LNK/ACT
(Green)
Flashing
Transmitting or receiving data.
ACT stands for ACTIVITY.
Steady
Light solid green for a port transferring at 100Mbps.
100
(Yellow)
Off The port is transferring at 10Mbps If this LED is dark.
10/100/100TX or 1000SX/LX
Steady
Light solid green for a port transferring at 1000Mbps.
1000
(Green)
Off The port is not transferring at 1000Mbps If this LED is dark.
Flashing
Transmitting or receiving data.
ACT stands for ACTIVITY.
ACT
(Yellow)
Off Neither transmitting nor receiving data.
Physical Ports
The Xpress-Pro SW 94000 switch provides:
Eight 10/100BaseTX ports
Eight 10/100BaseTX ports + one 100BaseFX port
Six 10/100BaseTX ports + two 100BaseFX ports
Four 10/100BaseTX ports + four 100BaseFX ports
Eight 10/100BaseTX ports + one 10/100/1000BaseTX port
Eight 10/100BaseTX ports + one 1000BaseSX/LX port
Connectivity
RJ-45 connectors
ST or SC connector on 100BaseFX fiber port.
SC connector on 1000BaseSX/LX fiber port.
Mode Selection
10BaseT full-duplex mode
10BaseT half-duplex mode
100BaseTX full-duplex mode
100BaseTX half-duplex mode
100BaseFX full-duplex mode
1000BaseT/SX/LX full-duplex mode
Auto-sensing mode