Filter
Top Products
Chapter 3. Features and technologies
What is included with your server
The RD230 server package includes the server, a power cord, documentation, the documentation DVD, and
software media.
Features
The RD230 server offers the following features and technologies:
• Microprocessor(s): The server supports up to two Intel® Xeon® dual-core, quad-core, or hex-core
microprocessors.
• BIOS: The server rmware denes a standard interface between the operating system, platform rmware,
and external devices.
• EasyStartup DVD: The ThinkServer EasyStartup program guides you through the conguration of the
hardware, the redundant array of independent disks (RAID) controller, and the installation of the operating
system and device drivers.
• Integrated network support:
The server comes with two integrated single-port Gigabit Ethernet
controllers and each supports connection to a 10 Mbps, 100 Mbps, or 1000 Mbps network. For more
information, see “Conguring the Gigabit Ethernet controller” on page 80.
• Large data-storage capacity and hot-swap capability: Some hot-swap server models support four
3.5-inch hot-swap hard disk drives. With the hot-swap feature, you can add, remove, or replace hard disk
drives without turning off the server.
• Large system-memory capacity: The server supports up to 64 GB of system memory. The memory
module supports error correcting code (ECC) for up to eight industry-standard single-rank or dual-rank,
1333 MHz, DDR3 (third-generation double-data-rate) registered synchronous dynamic random access
memory (SDRAM) dual inline memory modules (DIMMs).
• High-performance graphics controller: The server comes with an onboard high-performance graphics
controller that supports high resolutions and includes many performance-enhancing features for the
operating-system environment.
• Redundant connection:
The two onboard network interface controllers (NIC) provide a failover capability
to a redundant Ethernet connection. If a problem occurs with the primary Ethernet connection, all
Ethernet trafc that is associated with the primary connection is automatically switched to the redundant
NIC. If the applicable device drivers are installed, this switching occurs without data loss and without
user intervention.
• Intelligent Platform Management Interface (IPMI) 2.0: The command-line interface provides direct
access to server management functions through the IPMI 2.0 protocol. Use the command-line interface
to issue commands to control the server power, view system information, and identify the server. You can
also save one or more commands as a text le and run the le as a script.
• RAID support: The server supports the onboard SATA software RAID and an add-on SAS RAID card
(ThinkServer 8708ELP SAS RAID Adapter, ThinkServer 8708EM2 RAID Adapter, or ThinkServer RAID
700 Adapter), which are required for you to use the hot-swap SATA or SAS hard disk drives and to
create the RAID congurations.
Specications
The following information is a summary of the features and specications of the server. Depending on the
server model, some features might not be available, or some specications might not apply.
© Copyright Lenovo 2010, 2011
5