Filter
Top Products
5. Remove the fastening screw that secures the riser card 1 and lift the riser card straight up by its
edges to remove it 2 .
Figure 23. Removing the riser card (with a PCI card installed)
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to “Completing the parts replacement” on page 64.
Installing or removing a PCI card
This section provides instructions on how to install or remove a PCI card.
Installing a PCI card
Attention: Do not open your server or attempt any repair before reading and understanding the “Safety information”
on page iii
and “Guidelines” on page 17.
This section provides instructions on how to install a PCI card.
To install a PCI card, do the following:
Note: Use any documentation that comes with the PCI card and follow those instructions in addition to
the instructions in this section.
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
Chapter 5. Installing, removing, or replacing hardware 35