Filter
Top Products
1060 DIMM
For access, remove these FRUs in order:
v “1010 Battery pack” on page 80
v “1040 Thermal cover” on page 84
Table 14. Removal steps of DIMM
1
1
2
Note: If only one DIMM is used on the computer you are servicing, the card
must be installed in SLOT-0 (a: lower slot), but not in SLOT-1 (b: upper
slot).
b
a
When installing: Insert the notched end of the DIMM into the socket. Press the
DIMM firmly, and pivot it until it snaps into the place. Make sure that it is
firmly fixed in the slot and does not move easily.
Removing and replacing a FRU 87