Table 27. Removal steps of LCD front bezel for 12.1-in. WXGA+ LCD model (continued)
2
M2.5 × 4 mm, wafer-head, nylon-coated (5)
Black 0.392 Nm
(4 kgf-cm)
3
M2 × 3.5 mm, wafer-head, nylon-coated (4) Silver
0.181 Nm
(1.85 kgf-cm)
In step 4 and 5 , detach the claws. Then remove the LCD front bezel.
When installing:
Make sure that all the claws are attached rmly.
2020 Inverter card or LED board
For access, remove these FRUs in order:
• “1010 Battery pack” on page 71
• “2010 LCD front bezel” on page 111
Table 28. Removal steps of inverter card or LED board
For ThinkPad X200, X200s, and X200si:
Chapter 8. Removing and replacing a FRU 113
