Filter
Top Products
Table 13. Removal steps of palm rest (continued)
When installing:
1. In models with the ngerprint reader, attach the ngerprint reader connector rmly to the system board.
2. Press the left and right top edges of the palm rest to t it into place.
3. Push the front side of the palm rest until it clicks into place.
1
2
2
1
4. Close the LCD cover and turn the computer over. Then fasten the ve screws to secure the palm rest.
1060 Backup battery
DANGER
Use only the battery specied in the parts list for your computer. Any other battery could ignite
or explode.
For access, remove these FRUs in order:
• “1010 Battery pack” on page 71
• “1040 Keyboard” on page 77
• “1050 Palm rest or palm rest with ngerprint reader” on page 80
82 Hardware Maintenance Manual