Filter
Top Products
Figure 9. Installing the memory module
6. To complete the installation, go to “Completing the FRU replacement” on page 97.
Installing or replacing a PCI card
Attention
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre
Safety and Warranty Guide, go to:
http://www.lenovo.com/support
This section provides instructions on how to install or replace a PCI card.
Your computer has one standard PCI card slot, two PCI Express x1 card slots, and one PCI Express x16
graphics card slot.
To install or replace a PCI card, do the following:
1. Remove the computer cover. See “Removing the computer cover” on page 68.
2. At the rear of the computer, press the release button 1 to open the card latch 2 and remove the
card slot cover.
Figure 10. Opening the card latch
3. Remove the new PCI card from its static-protective package.
74 ThinkCentre Hardware Maintenance Manual