Filter
Top Products
Diagnostic Error Code FRU/Action
217-28X-XXX 217-29X-XXX Hard Disk Drive (SCSI) error 1. Hard Disk Drive Cable
2. Check AC/DC power adapter voltages
3. Reseat the hard disk drive cable
4. Hard Disk drive (SCSI)
5. SCSI adapter card
6. System board
220-000-XXX Hi-Capacity Cartridge Drive Test Passed
No action
220-XXX-XXX Hi-Capacity Cartridge Drive error 1. Remove the Hi-Capacity Cartridge Drive and
re-test the system
301-XXX-XXX Keyboard error 1. Keyboard
2. Check and test mouse
3. System board
301-000-XXX Keyboard Test Passed No action
302-000-XXX Mouse Test Passed No action
302-XXX-XXX Mouse error 1. Mouse
2. Check and test Keyboard
3. System board
303-000-XXX Joystick Test Passed No action
303-XXX-XXX Joystick error Remove the Joystick and re-test the system
305-000-XXX Monitor DDC Test Passed
No action
305-250-XXX Monitor DDC self test failure 1. Run Setup to enable DDC
2. Cable
3. Monitor
4. Video card
5. System board
415-000-XXXModem Test Passed No action
415-XXX-XXX Modem error Remove the Modem and re-test the system
Beep symptoms
Beep symptoms are tones or a series of tones separated by pauses (intervals without sound) during POST.
The following tables describes beep symptoms.
Beep Symptom FRU/Action
1, 2, or 3 beeps
Reseat the memory modules. If the error persists, replace
the memory modules one at a time until the failing module
is determined.
4, 5, 6, or 7 beeps9, 10, or 11 beeps
Before replacing the system board, remove any optional
adapters (Express card, Modem card, Media reader) and
retry. If the problem persists, replace the system board.
Otherwise, reinstall the optional adapters one at a time
until the failing adapter is determined.
8 beeps Replace the system board.
Chapter 7. Symptom-to-FRU Index 59