Filter
Top Products
8. Connect the signal and power cables to the rear of the new hard disk drive.
9. Slide the new hard disk drive into the drive bay until it snaps into position.
10.Reconnect the power cable to the optical drive.
11.Go to “Completing the FRU replacement” on page 81.
Replacing an optical drive
This section provides instructions on how to replace an optical drive.
1. Open the computer cover. See “Opening the cover” on page 68.
2. Remove the front bezel by releasing the two tabs and pivoting the bezel forward to remove completely.
3. Disconnect the signal and power cables from the rear of the optical drive.
4. Press the blue release button and remove the optical drive out the front of the computer.
74 Hardware Maintenance Manual