Filter
Top Products
3. Disconnect the cable connected to the Express card.
4. Remove the four screws that secure the Express card assembly to the Chassis.
5. Remove the Express card assembly from the system board.
6. Install the new Express card assembly into the chassis by aligning the holes in the Express card assembly
with the pins in the chassis.
7. Install the four screws to secure the Express card assembly to the chassis.
8. Reconnect the cable to the Express card assembly.
9. Go to “Completing the FRU replacement” on page 81.
Replacing the Media Card Reader
This section provides instructions on how to replace the Media Card Reader.
1. Open the computer cover. See “Opening the cover” on page 68.
2. Locate the Media Card Reader. See “Locating components” on page 66
3. Disconnect the Media Card Reader cable connected to the system board. See “System board locations”
on page 68
4. Remove the screw that secures the Media Card Reader to the Chassis.
78 Hardware Maintenance Manual