Lenovo 68852BU Tablet User Manual


 
4. Click the Monitor-2 icon (for the secondary display, the external display).
5. Set the resolution for the secondary display.
6. Place the icons for the monitors so that they touch.
Note: You can set the monitors in any relative position, but the icons must touch each other.
7. Click OK to apply the changes.
To change the color settings, right-click on the desktop, and click Screen resolution. Click Advanced
Settings, select the Monitor tab, and then set Colors
Using audio features
Your computer is equipped with the following:
Combo audio jack, 1/8 inch (3.5 mm) in diameter
Built-in stereo speakers
Built-in digital microphone
Your computer also has an audio chip that enables you to enjoy various multimedia audio features:
Compliant with Intel High Denition Audio
Recording and playback of PCM and WAV les in 16-bit or 24-bit format
Playback of a WAV le at a sample rate of 44.1KHz to 192 KHz
Playback of MIDI les through a Wave table synthesizer under Microsoft Windows operating systems
Playback of MP3 les through the Windows Media Player or a software MP3 player
Recording from various sound sources
Note: The combo audio jack does not support a conventional microphone.
The following table shows which functions of the audio devices attached to the jacks on your computer or
the supported ThinkPad OneLink Dock are supported.
Table 3. Audio feature list
Jack Headset with a 3.5–mm
4-pole plug
Conventional headphone Conventional microphone
Combo audio jack
Headphone and
microphone functions
supported
Headphone function
supported
Not supported
Combo audio jack of
the supported ThinkPad
OneLink Dock
Headphone and
microphone functions
supported
Headphone function
supported
Not supported
Conguring for sound recording
To congure the microphone for optimal sound recording , use the SmartAudio program. To start the
program, go to Control Panel and click Hardware and Sound SmartAudio.
Using the integrated camera
If your computer has an integrated camera, you can use the camera to preview your video image and
take a snapshot of your current image.
42 User Guide