Filter
Top Products
Message Solution
0280: Previous boot
incomplete
Your computer was previously unable to complete the boot
process.
Turn the computer off; then turn it on to start the BIOS Setup
Utility. Verify the configuration and then restart the computer
either by choosing the Exit Saving Changes option under the
Restart item or by pressing F10. If you still see the same error
code, have the computer serviced.
1802: Unauthorized
network card is
plugged in - Power
off and remove the
miniPCI network
card.
The Mini-PCI network card is not supported on this computer.
Remove it.
1803: Unauthorized
daughter card is
plugged in - Power
off and remove the
daughter card.
The daughter card is not supported on this computer. Remove
it.
1830: Invalid
memory
configuration -
Power off and install
a memory module to
Slot-0 or the lower
slot.
The current memory configuration is not supported. If you
install a memory module in only one of the two memory slots,
install it in the slot indicated as ″SLOT-0″.
2100: Initialization
error on HDD0
(Main hard disk
drive)
The HDD or SSD is not working. Have the drive serviced.
2102: Initialization
error on HDD1
(Ultrabay hard disk
drive)
The HDD or SSD is not working. Have the drive serviced.
2110: Read error on
HDD0 (Main hard
disk drive)
The HDD or SSD is not working. Have the drive serviced.
2112: Read error on
HDD1 (Ultrabay
hard disk drive)
The HDD or SSD is not working. Have the drive serviced.
Chapter3. Solving computer problems 15