Filter
Top Products
Table 10. Removal steps of battery pack
Slide the left battery latch to the unlocked position 1 , and then hold the right battery latch to the unlocked position
until you remove the battery
2 .
1
2
2
When installing:
Install the battery pack along the slide rails of the slot. Make sure that the left battery release lever is in the locked
position.
1030 Hard disk drive (HDD) and solid state drive (SSD)
For access, remove this FRU:
• “1020 Battery pack” on page 61
Attention:
• Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to
physical shock. Improper handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
62 ThinkPad X220 Tablet and X220i Tablet Hardware Maintenance Manual