Filter
Top Products
Level One Printer Servers
Printing - General
Problem No. 1 When using 10BaseT cabling, the LevelOne Printer Server unit
does not work.
Solution No. 1 Check the Hub’s link LED for the port to which the LevelOne
Printer Server is connected. If it is off, there is a problem in the
network cable. If using 10BaseT or 100BaseT, check the LED next
to the connector. It should be on if the network connection is OK.
Problem No. 2 A printing device connected to the a LevelOne Printer Server
port cannot print or prints garbage.
Solution No. 2 Check the following:
• Cable connection between LevelOne Printer Server and printer.
• Printer driver in the application program or Windows matches
the printer.
Problem No. 3 The Configuration button on the Printer Status screen in
BiAdmin is grayed out, even though my printer in bi-
directional.
Solution No. 3 The button is unavailable if the printer is busy. You must wait until
the printer is idle.
- 78 -