Filter
Top Products
12
Chapter 4 Using the Enclosure
4.1 Connecting the enclosure
Follow these steps to connect your MUS-2500 Smart USB Storage to computer:
1. Place your 2.5” hard drive into the enclosure. For more information on setting up the
enclosure, see Chapter 3, “Hardware Setup”.
2. Plug the provided USB cable into the PC port in the enclosure. Plug the USB slot into the
computer’s USB port.
3. You’ve done everything you need to get your enclosure MUS-2500 with SmartUSB utility up
and running. The first time you use your MUS-2500 with SmartUSB utility, the SmartUSB
utility starts and helps you to enter the application.
4. If your hard drive is new or not partitioned, the system will pop up a warning message to
remind you to initialize, partition and format your hard drive with file systems FAT, FAT32 or
NTFS.
"------------------------------------------------------------------------------------------------------------------
Note: Some desktop or notebook computers may not be able to run the enclosure properly;