Filter
Top Products
64
a from the pen drive or the card reader connected to
ng-copy job, you can touch the external button again to
cancel the job.
Click System Setting
Chapter 10 External Button and USB HUB
MUS-2500 Smart USB Storage includes an external button which can be applied to do the
Backup job and Hub copy job. So, just one touch, the SmartUSB utility will perform the backup job
based on the rules you define or copy the dat
the enclosure. If you want to stop the runni
10.1 Set the external button
n
button in the SmartUSB wizard screen.
Click General tab, and set external button to perform any job in Set a button task for the
p It can be applied to do the following tasks:
and Backup
age).
o
external button of mobile storage group.
Backup job: configure the Button Task, Job Name and Destination to define the
external button.
Hub copy job: configure the Button Task, Job Name, Destination
Type to define the external button.
Button Task: select Copy Hub data to Mobile Storage
Job Name: select the one of the following items:
- Copy data from port 1 of HUB: copy the data of pen drive inserted in port1
to mobile storage (MUS-2500 Smart USB Storage).
- Copy data from port 2 of HUB: copy the data of pen drive inserted in port2
to mobile storage (MUS-2500 Smart USB Storage).
- Copy data from all ports of HUB: copy the data of pen drives inserted in
port1 and port2 to mobile storage (MUS-2500 Smart USB Stor