Filter
Top Products
PC Configuration
Figure 17: Windows NT4.0 - IP Address
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify
an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the LevelOne
Wireless Broadband Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the LevelOne Wireless Broadband
Router.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the
following changes.
1. The Default Gateway must be set to the IP address of the LevelOne Wireless Broadband
Router. To set this:
• Click the Advanced button on the screen above.
• On the following screen, click the Add button in the Gateways panel, and enter the
LevelOne Wireless Broadband Router 's IP address, as shown in Figure 18 below.
• If necessary, use the Up button to make the LevelOne Wireless Broadband Router the
first entry in the Gateways list.
29