Filter
Top Products
Operation and Status
• Internet Access - This is the IP Address used by this device, as
seen by Internet users. This address is provided by your ISP.
• Dial-in - This is the IP Address used by the remote user. This
IP Address is allocated by the DHCP Server function in the
LevelOne Wireless Broadband Router.
User
There are 2 possibilities:
• For Internet Access, this shows the Internet Account name.
• For Dial-in operations, this shows the current user.
Phone Line Speed
The connection speed over the phone line, between your modem
and the number dialed, as reported by your modem.
Serial Line Speed
The connection speed between this device and the modem. This
setting can be changed on the Dial-in screen.
Connection Log
Connection Log
This displays connection details.
See below for a description of the most common items in this log.
Connection Log
This shows the commands sent to the modem, and any status messages returned by the modem.
Note that you must click Refresh to update the information.
The following table lists the common messages, and their meaning.
Message Description
Dialing Dialing the ISP
Try to establish
physical connection.
The device is trying to connect with the ISP, using the modem.
Busy The number dialed was busy.
Physical line is
connected
Physical connection to ISP has been established.
CONNECT nnnnnn
Physical connection was successful; nnnnnn indicates the speed of
the serial link as currently configured.
Max phone line speed
nnnnnn bps
nnnnnn is the maximum speed of the modem, according to the
current configuration.
DCD low,
DSR low
Physical line break, connection lost.
send "-----"
wait "-----"
"AT" commands sent to the modem are displayed as they are sent.
Commands in the Script file are also displayed as they are executed.
Start PPP
Having established a physical connection, a PPP connection is now
being established.
PPP up fail The PPP connection could not be established.
57