Filter
Top Products
This menu is available from the Network/Ports menu:
Network/Ports Network <x> Net <x> Setup Wireless
Menu item Description
Network Mode
Infrastructure
Ad hoc
Specifies the network mode
Notes:
• Infrastructure mode lets the printer access a network using an access
point.
• Ad hoc is the factory default setting. Ad hoc mode configures the
printer for wireless networking directly between it and a computer.
Compatibility
802.11n
802.11b/g
802.11b/g/n
Specifies the wireless standard for the wireless network
Choose Network
<list of available networks>
Lets you select an available network for the printer to use
View Signal Quality
Lets you view the quality of the wireless connection
View Security Mode Lets you view the encryption method for the wireless connection.
“Disabled” indicates that the wireless network is not encrypted.
AppleTalk menu
Menu item Description
Activate
Yes
No
Activates or deactivates AppleTalk support
Note: Yes is the factory default setting.
View Name Shows the assigned AppleTalk name
View Address Shows the assigned AppleTalk address
Set Zone
<list of zones available on the
network>
Provides a list of AppleTalk zones available on the network
Note: The factory default setting is the default zone for the network. If no default
zone exists, the zone marked with an * is the factory default setting.
NetWare menu
This menu is available from the Network/Ports menu:
Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup NetWare
Menu item Description
Activate
Yes
No
Activates NetWare support
Note: No is the factory default setting.
Understanding printer menus
170