Filter
Top Products
14
OptraImage Setup Guide
Method 2: Print server TCP/IP setup utility
Use this simple utility to initialize the IP address if your
computer is running Windows 95/98, Windows NT, or
Windows 2000.
Use either form of UAA
(MSB or canonical).
You need to know the 12-digit physical address (UAA) of the
print server to use this method. The UAA is listed on the
network setup page. See “Print a network setup page” on
page 13.
You can find information about installing,
using, and troubleshooting the utility on
the Drivers, MarkVision, and Utilities CD.
To install the utility:
1 Launch the Drivers, MarkVision, and Utilities CD that
shipped with your OptraImage hardware.
2 Do a custom install to add network support.
3 In the list of installable components, select Print Server
TCP/IP Setup Utility.
4 Follow the instructions on your screen.