Filter
Top Products
OptraImage Setup Guide
5
Step 1: Set up your printer
1 Set up the printer according to the instructions in the
documentation shipped with your printer. This includes
setting up all bins and trays, duplex hardware, and any
other options purchased.
You may have received more than one
copy of the Drivers, MarkVision, and
Utilities CD. When installing printer
drivers, make sure you use the latest
version.
If you attach the printer to a network, save your network
setup page to use the information contained on it during
the OptraImage setup.
2 Verify the printer hardware setup by printing the menu
settings page. Instructions for printing this page are
included in your printer setup documentation.
3 Turn the printer power off before continuing with the next
step.
Read the following caution statement.
CAUTION:
Turn All Power Off
Before and during OptraImage setup, unplug all power cords,
fax/phone cables, and network cables from their electrical
outlets. This includes all cords and cables attached to a
workstation, printer, MarkNet print server, scan unit, and any
other peripherals powered from an outlet.
Following setup, all equipment may be plugged into properly
grounded or fax/phone outlets and turned on.