Filter
Top Products
OptraImage Setup Guide
29
Replacing the ADF
pad assembly
If you experience problems with papers double-feeding
through the ADF, the pad assembly may be worn out and
need to be replaced.
1 Turn off the scan unit and disconnect the power supply.
2 Open the ADF front cover
.
3 Remove the old ADF detachable pad assembly by
squeezing and pulling out the upper part of the pad clamp
4 Hold the upper part of the new clamp, squeeze, and place
it gently in the pad holder.
5 Close the ADF.
6 Reconnect the power supply and turn the scan unit back
on.