Filter
Top Products
28
Note: The paper exit tray can hold up to 50 sheets of paper.
Load an original document into the ADF
You can load up to 50 sheets of your original document (text side up) in the
ADF (available on some models) for scans, copies, and faxes.
100 sheets of
custom size paper
• The print side of the paper faces you.
• Your paper size fits within these dimensions:
Width
• 76 - 216 mm
• 3.0 - 8.5 inches
Length
• 127 - 432 mm
• 5.0 - 17.0 inches
• The paper guide rests against the left edge of the paper.
25 iron-on
transfers
• You follow the loading instructions on the iron-on transfer
packaging.
• The blank side of the transfers faces you.
• The paper guide is against the left edge of the iron-on
transfers.
20 sheets of
banner paper
• The banner paper is designed for use with inkjet printers.
• You select Letter Banner or A4 Banner in Print
Properties. For help, see “Using Print Properties” on
page 19. Failure to do so will cause a paper jam.
• You remove any paper from the paper support before
inserting banner paper.
• Place a stack of banner paper with only the number of
sheets you need to print your banner on top of the
All-In-One.
Load up to: Make sure: