Lexmark 90P3000 All in One Printer User Manual


 
Scanner ADF Cover Open
Try one or more of the following:
Close the ADF cover to clear the message.
Press to cancel the current scan job.
Scanner Disabled
Try one or more of the following:
Check the printer software settings or the Administration settings from the printer to enable the scanner.
For more information, contact customer support.
Press
OK
to clear the message.
Short Paper
Try one or more of the following:
Touch OK or press
OK
, depending on your printer model.
Make sure the paper size is correctly set.
Load paper with the correct size in the tray or on the paper support.
Check the paper guides, and then make sure the paper is properly loaded in the tray or on the paper support.
Cancel the current print job.
Standard Network Software Error
Try one or more of the following:
Press
OK
to clear the message.
Turn the printer off and then back on to reset the printer.
Unrecoverable Scan Error
Try one or more of the following:
Restart your printer.
Update your printer firmware. For more information, visit http://support.lexmark.com.
USB Device Not Supported
Remove the unrecognized USB device and replace it with a supported device.
USB Hub Not Supported
Remove the unrecognized USB hub.
Troubleshooting 147