Filter
Top Products
Inserting a memory card Inserting a flash drive
Notes:
• Insert the card with the brand name label facing up.
• Make sure any arrows on the card point toward the printer.
• If necessary, connect the memory card to the adapter that
came with it.
• Make sure that the memory card inserted is supported by the
printer. For more information, see “Supported memory cards
and file types” on page 47.
• The card reader light comes on when a memory card is inserted
and blinks when a memory card is being accessed.
Notes:
• The flash drive uses the same port that is used
for a PictBridge camera cable.
• An adapter may be necessary if your flash drive
does not fit directly into the port.
Warning—Potential Damage: Do not touch any cables, ports, any
network adapter, any connector, the memory device, or the printer in the
areas shown while actively printing, reading, or writing from the memory
device. A loss of data can occur.
Follow the instructions on the printer display or select from available options.
Notes:
• If the printer does not recognize the memory device, then remove and reinsert it.
• The printer reads only one memory device at a time.
Printing 48