Lexmark 90P3000 All in One Printer User Manual


 
Scenario 5: Country or regionspecific setup
Different countries or regions have different types of telephone wall jacks. The standard wall jack adopted by most
countries or regions is the Registered Jack-11 (RJ-11). You need to have an RJ11 plug, or a telephone cable that has an
RJ11 connector, so you can connect a device to an RJ11 wall jack.
The fax ports on the back of the printer and the telephone cable that comes with the printer have RJ11 connectors. If
you have a different type of connector in your country or region, then you may need to use an RJ11 adapter.
Connecting the printer to a nonRJ11 wall jack
E
X
T
L
IN
E
To connect:
1 Connect one end of a telephone cable to the port of the printer.
2 Connect the other end of the cable to the RJ11 adapter, and then connect the adapter to the wall jack.
Faxing 83