Filter
Top Products
Notices
9
Printer energy consumption
The following table documents the power consumption
characteristics of the printer.
The power consumption levels listed in the previous table represent
time-averaged measurements. Instantaneous power draws may be
substantially higher than the average.
Power Saver
As part of the ENERGY STAR program, this printer is designed with
an energy-saving mode called Power Saver. The Power Saver
Mode is equivalent to the EPA Sleep Mode. The Power Saver Mode
saves energy by lowering power consumption during extended
periods of inactivity. The Power Saver Mode is automatically
engaged after this printer is not used for a specified period of time,
called the Power Saver Timeout. The factory default Power Saver
Timeout is 15 minutes for the Lexmark E230 and 30 minutes for the
Lexmark E232, Lexmark E330, and Lexmark E332n.
By using the printer configuration menus, the Power Saver Timeout
can be modified between 1 minute and 240 minutes. Setting the
Power Saver Timeout to a low value reduces energy consumption,
but may increase the response time of the printer. Setting the Power
Saver Timeout to a high value maintains a fast response, but uses
more energy.
If the Power Saver Mode is affecting the effective use of this printer,
this mode can be disabled from the Local Printer Setup Utility (see
page 103) or, if you have a network model, from the printer’s
resident Web page (see page 102).
Total energy usage
It is sometimes helpful to calculate the total printer energy usage.
Since power consumption claims are provided in power units of
Watts, the power consumption should be multiplied by the time the
printer spends in each mode in order to calculate energy usage.
The total printer energy usage is the sum of each mode's energy
usage.
Statement of Limited Warranty
Lexmark International, Inc., Lexington, KY
This warranty applies to the United States and Canada. For
customers outside the U.S. and Canada, refer to the
country-specific warranty information that came with your printer.
Lexmark E230, E232, E330, E332n
This Statement of Limited Warranty applies to this product if it was
originally purchased for your use, and not for resale, from Lexmark
or a Lexmark remarketer, referred to in this statement as
“Remarketer.”
Warranty
Lexmark warrants that this product:
• Is manufactured from new parts, or new and serviceable
used parts, which perform like new parts
• Is free from defects in material and workmanship
• Conforms to Lexmark’s official published specifications
• Is in good working order
If this product does not function as warranted during the warranty
period, contact a Remarketer or Lexmark for repair without charge.
If this product is a feature or option, this statement applies only
when that feature or option is used with the product for which it was
designed. To obtain warranty service, you may be required to
present the feature or option with the product.
If you transfer this product to another user, warranty service under
the terms of this statement is available to that user for the
remainder of the warranty period. You should transfer proof of
original purchase and this statement to that user.
Warranty service
The warranty period is 12 months and starts on the date of original
purchase as shown on the purchase receipt.
To obtain warranty service you may be required to present proof of
original purchase. Warranty service will be provided at a
Remarketer or a Lexmark designated location. You may be required
to deliver your product to the Remarketer or Lexmark, or ship it
prepaid and suitably packaged to a Lexmark designated location.
You are responsible for loss of, or damage to, a product in transit to
the Remarketer or the designated location.
When warranty service involves the exchange of a product or part,
the item replaced becomes the property of the Remarketer or
Lexmark. The replacement may be a new or repaired item. The
replacement item assumes the remaining warranty period of the
original product.
Replacement is not available to you if the product you present for
exchange is defaced, altered, in need of a repair not included in
warranty service, or damaged beyond repair. Also, such product
must be free of any legal obligation or restrictions that prevent its
exchange.
Before you present this product for warranty service, remove all
programs, data, and removable storage media.
Mode Description
Power consumption
(by Machine Type)
4505-100,
4505-200,
4546-xxx
4505-300,
4505-310,
4547-xxx
Printing
Printer is generating
hard copy output 370 W 420 W
Ready
Printer is waiting for
a print job 65 W 80 W
Power
Saver
Printer is in energy
saving mode 6 W 7 W
Off
Printer is plugged
into a wall outlet, but
switch is turned off 0 W 0 W