Filter
Top Products
Using the operator panel
75
Font error
Defective flash
Light sequence:
• Continue—On
• Toner Low/Replace PC Kit—Blink
• Error—On
What this light sequence means:
The printer has received a request for a PPDS font which is not
installed.
What you can do:
• Press and release Cancel to cancel the print job.
• Press and hold Cancel to reset the printer.
• Press Continue to clear the message and continue
printing.
Light sequence:
• Continue—On
• Load Paper—On
• Error—On
What this light sequence means:
The printer detects defective flash memory.
What you can do:
• Press Continue to clear the message and continue
printing. Downloaded fonts and macros not previously stored
in flash memory are deleted.
• See “How to add a memory card” on page 45 to install
flash memory.