Filter
Top Products
Getting Started
16
Troubleshooting
Use this chapter to solve problems you may have while
setting up your adapter.
An indicator light is not on
Note: See page 5 to locate the indicator lights.
For this problem: See page:
An indicator light is not on 16
The Lexmark printer software installation
screen did not appear
17
An error message appears 17
There is not a Network button on the Results:
No Printer Attached screen
17
My network printer does not appear in the list
of available printers
18
There is not an Install Selected Printer button
on the Network Configuration screen
18
The New Network Printer Found screen
appears
19
The Printer Selection screen appears 19
My network printer will not print 19
If this indicator
light is not on:
Make sure the:
Power Adapter power supply is connected
properly.
USB USB cable connecting the adapter to
the printer is secure and the printer is
on.
Note: This light blinks to indicate USB
activity.
Network link Ethernet cable connecting the adapter
to the network is secure.
If the cable is connected properly and
the light is still not on, make sure the
network is operating properly. For
additional help, refer to your network
documentation or contact your network
administrator.
Note: This light blinks to indicate
network activity.