Filter
Top Products
Getting Started
29
3 Complete the hardware setup, software installation,
and configuration for your printer and adapter on the
new network. For help, see Steps 1 through 9 on
pages 2 through 6.
Disconnect the Ethernet cable from the adapter
1 Unplug the adapter and printer power supply.
2 Push up on the release tab of the Ethernet connector
with a narrow pointed object (for example, an ink
pen).
3 Pull the Ethernet cable toward you until the connector
is completely removed from the adapter.
Contact Lexmark
Visit our Web site at www.lexmark.com to:
• Receive technical support.
• Register your adapter.
Other ways to contact our Customer Support Center:
Windows
• From the Lexmark Solution Center, click Contact
Information Customer Support.
• Insert the printer software CD that came with your
printer into your CD-ROM drive, and then click
Contact Lexmark Technical Support.
Mac OS 8.6 to 9.2
• From your printer folder, double-click Technical
Support.
• Insert the printer software CD that came with your
printer into your CD-ROM drive, and then click
Contact Lexmark Technical Support.
Mac OS X version 10.0.3 to 10.1
1 Insert the printer software CD that came with your
printer into your CD-ROM drive.
2 Double-click the CD icon.
3 Double-click Install and then click Contact Lexmark
Technical Support.