Filter
Top Products
172
Printer Language
Purpose:
To establish the default printer language used to communicate data from the computer to the printer.
Values:
Note: Setting a printer language as the default does not prevent a software application
from sending print jobs that use the other language.
Resource Save
Purpose:
To determine what the printer does with downloaded resources, such as fonts and macros stored in
RAM, if the printer receives a job that requires more memory than is available.
Values:
Toner Alarm
Purpose:
To specify how the printer responds when it is out of toner.
Values:
See also:
Auto Continue
PCL Emulation* PCL emulation, compatible with Hewlett-Packard printers.
PS Emulation PostScript emulation, compatible with Adobe PostScript language.
Off* Printer retains downloaded resources only until memory is needed. It then deletes those
resources associated with the inactive printer language.
On Printer retains all downloaded resources for all printer languages during language changes
and printer resets. If the printer runs out of memory, 38 Memory Full is displayed.
Off* An error message is displayed until someone replaces the toner cartridge. If an
Auto Continue value is selected from the Setup Menu, the printer resumes printing
after the specified timeout value.
Single Printer stops printing, displays an error message, and sounds three quick beeps.
Continuous Printer stops printing, displays an error message, and repeats three beeps every
10 seconds until the toner cartridge is replaced.