Filter
Top Products
80
3
Pull the integrated tray out of the printer.
If you see the edge of the paper in the integrated tray:
a Pull the paper down and out.
b Slide the tray all the way into the printer.
c Slide the duplex front access cover back into the duplex unit. Make sure it snaps into
place.
If you do not see the edge of the paper in the integrated tray:
a Push the tray back into the printer.
b Open the printer upper and lower front doors.
c Remove the print cartridge.
WARNING: Never touch the photoconductor drum on the underside of the print cartridge. Use
the handhold on the cartridge to avoid touching this area.
You should see the leading edge of the paper now.
Note: The paper may be covered with unfused toner, which can stain garments and skin.
d Gently push the feed roller release lever toward the back of the printer.