Lexmark MS410 Printer User Manual


 
Complex page may misprint [39]
Try one or more of the following:
From the printer control panel, press to clear the message and continue printing.
Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print
job.
Cancel the print job.
Install additional printer memory.
Defective flash memory [51]
Try one or more of the following:
Replace the defective flash memory card.
From the printer control panel, press to ignore the message and continue printing.
Cancel the current print job.
Paper too short [34]
Try one or more of the following:
Load the correct size of paper in the tray.
From the printer control panel, press to clear the message and print using a different tray.
Check the tray length and width guides and make sure the paper is loaded properly in the tray.
Make sure the correct paper size and type are specified in Print Properties or in the Print dialog.
Make sure the paper size and type settings are specified in the Paper menu on the printer control panel.
Make sure the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, then make sure the
paper is large enough for the data being printed.
Cancel the print job.
Insert tray [x]
Insert the indicated tray into the printer.
Memory low, no Resource Save [35]
Try one or more of the following:
From the printer control panel, press to disable Resource Save, clear the message, and continue printing.
Install additional printer memory.
Troubleshooting 118