Lexmark MS410 Printer User Manual


 
Use To
Run Initial setup
Yes
No
Run the setup wizard.
Notes:
Yes is the factory default setting.
After completing the setup wizard by selecting Done at the
country or region selection screen, the default becomes No.
Paper Sizes
US
Metric
Specify the unit of measurement for paper sizes.
Notes:
US is the factory default setting.
The initial setting is determined by your country or region
selection in the initial setup wizard.
Timeouts
Sleep Mode
Disabled
1–120 min
Set the amount of time the printer waits after a job is printed before
it goes into a reduced power state.
Notes:
“30 min” is the factory default setting.
“Disabled” appears only when Energy Conserve is set to Off.
Lower settings conserve more energy, but may require
longer warmup times.
Select a high setting if the printer is in constant use. Under
most circumstances, this keeps the printer ready to print
with minimum warmup time.
Timeouts
Hibernate Timeout
Disabled
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days
1 week
2 weeks
1 month
Set the amount of time the printer waits before it enters Hibernate
mode.
Notes:
“Disabled” is the factory default setting in all countries
except European Union countries and Switzerland.
“3 days” is the factory default setting for all European Union
countries and Switzerland.
Timeouts
Hibernate Timeout on Connection
Hibernate
Do Not Hibernate
Set the printer to Hibernate mode even if there is an active Ethernet
connection.
Note: “Do Not Hibernate” is the factory default setting.
Timeouts
Screen Timeout
15–300 sec
Set the amount of time in seconds the printer waits before the it
returns to a ready state.
Note: “30 sec” is the factory default setting.
Understanding the printer menus 75