Filter
Top Products
Operation
13
4.2 Control Panel
The Control Panel’s LCD and buttons are used to initiate various UPS operations, tests and
commands and to view the status of the UPS.
By pressing the Menu Up or Menu Down and Enter keys , it is possible to scroll through the
various menus. For details, see 4.2.1 - Controls and Messages and Figure 11.
Figure 10 Control Panel
4.2.1 Controls and Messages
Lighted LEDs
• UPS ON—UPS is in normal, online operation
• BYPASS—Load is supplied by the utility via automatic bypass
• BATTERY—Load is supported by the battery
• FAULT—A problem has developed within the UPS
Flashing LED
When the BYPASS LED is flashing, the utility is out of tolerance.
NOTICE
Risk of loss of power to connected load. Can cause equipment damage.
Never switch the UPS Off or switch from Online to Bypass in this status, because the load
would no longer be supplied.
Enter keyEscape key
Menu Up key Menu Down key
LCD
UPS On
LED
Battery
LED
Fault
LED
Bypass
LED