Filter
Top Products
7
User A properly paired User B properly paired
Before starting, be sure that power is off to the ServerSwitch 8200 and the users'
monitors. The users' monitors are attached to the two 13W3 connectors marked
"USER" on the rear of the ServerSwitch 8200. The keyboard/mouse sets are attached
to the two 8 pin mini-DIN connectors marked "USER". Be sure that the monitor and
keyboard/mouse set for each user are properly paired to the user output ports (i.e., user
A is connected to the 13W3 and 8 pin mini-DIN ports marked "A" and not to one of the
ports marked "B"). If the user’s monitor has an HD15 video connector, then a 13W3 to
HD15 converter cable must be used. Be sure that the cable transmits all video signals
properly.
Cable connections to a ServerSwitch 8200 as a stand-alone unit