Filter
Top Products
15
3.3.2 Auto Scan
The ServerSwitch can automatically scan through each attached server in auto scan
mode. Servers may be individually selected for inclusion in the auto scan; all server
ports are selected by default. See section 3.5.3 for more information on selecting
server ports for auto scan.
A user may begin auto scan by pressing AA at the on-screen menu to change no Auto no Auto
scanscan to start Auto scanstart Auto scan. Once the user exits from the on-screen menu by
pressing <ESC><ESC>, the auto scan will begin. The ServerSwitch will pause at each server
for the duration specified by the Auto scan durationAuto scan duration setting outlined in section
3.4.1. As the ServerSwitch displays each server port, its name and number will appear
as set by the user, or may not appear if the port name is set to Never OnNever On (see section
3.4.4). The user may stop the auto scan by pressing any key. Note that only those
servers that are powered and do not have their video output disabled (i.e., in suspend or
screen saver mode) will display video in auto scan mode. In addition, if the other user
has a port selected, then it will not be displayed in the auto scan.
3.4 System Setup
8200 System Setup
Version 3.17
Set Default Keyboard Type
Auto scan duration: 10 sec
Error Message duration: 5 sec
ignore Case in names
Server Name is Temporary
Port setup...
menu Window setup...
Server window setup...
Esc exits
System Setup Menu
The System SetupSystem Setup menu is accessed from the main on-screen menu. The menu
allows users to change system options for the ServerSwitch 8200, view the flash
software version, and access the flash update and factory defaults menu. The flash