Filter
Top Products
CPU Switch Smart SUN-MAC-PCInstallation and Use Page 33
L1 - CPU Switch Smart SUN-MAC-PC only locks on to active ports during
autoscanning (default)
L2 - CPU Switch Smart SUN-MAC-PC locks on to every port in turn during
autoscanning
L3 - CPU Switch Smart SUN-MAC-PC powers on in autoscan mode and locks on to
active ports only
L4 - CPU Switch Smart SUN-MAC-PC powers on in autoscan mode and locks on to
all ports
T1 - 2 seconds autoscan delay time before switching to next port (default)
T2 - 5 seconds autoscan delay time before switching to next port
T3 - 7 seconds autoscan delay time before switching to next port
T4 - 10 seconds autoscan delay time before switching to next port
T5 - 15 seconds autoscan delay time before switching to next port
T6 - 20 seconds autoscan delay time before switching to next port
T7 - 30 seconds autoscan delay time before switching to next port
T8 - 60 seconds autoscan delay time before switching to next port
Note: Autoscan mode is ended simply by selecting a fixed channel using the
keypad, the keyboard hotkeys or the mouse.
WARNING - Many modern monitors are fitted with automatic power save
relays and will switch off after a few seconds if connected to an inactive PC. If
you are using such a monitor you must not use the L2 feature. Constant
switching on and off of your monitor's relay will eventually damage your
monitor.
4.3 Mouse mode and mouse switching of channels
A three button PS/2 mouse or an IntelliMouse can be used to switch channels on the
CPU Switch Smart SUN-MAC-PC. To switch to the next channel, the user simply
holds down the central button or wheel button and presses the left or right hand
button to change the channel (see section 3.5). If the user does not wish to take
advantage of this feature, it can be disabled by selecting U2, U3 or U5. If the third
button is being used to switch the CPU Switch Smart SUN-MAC-PC then it is not
available for use with PC software although the function of an IntelliMouse wheel is
not affected. Consequently in modes U1, U2 and U4 the CPU Switch Smart SUN-
MAC-PC reports to the PCs that a 2 button mouse is connected. If you wish to use
the full function of a 3 button mouse or IntelliMouse for your PC software then you