Filter
Top Products
LINDY CPU Switch Dual Junior Installation and Use Page 35
manually by selecting channel '0' using the keyboard hotkeys or by pressing ESC
from the login screen.
3.6.9 AUTOSCAN MODE
Accessed from menu: GLOBAL PREFERENCES
Settings: SCAN LIST, ACTIVE PCs, ALL PCs
The LINDY CPU Switch supports an autoscan mode that automatically scans
between the connected computers in sequence. The LINDY CPU Switch supports
three autoscan modes. In the first mode the LINDY CPU Switch will scan all the
named computers that are defined in the autoscan list (SCAN LIST). The computers
defined in the scan list may be connected to cascaded LINDY CPU Switches. If you
wish to scan the ports on the current LINDY CPU Switch then you may select ALL
the available computers or just the available computers that are currently powered
on (the ACTIVE computers). Scanning just the active computers avoids blank
screens from being displayed and stops the monitor from going into a power down
state on every scan cycle.
WARNING - Many modern monitors are fitted with automatic power save
relays and will switch off after a few seconds if connected to an inactive PC. If
you are using such a monitor you must not set the LINDY CPU Switch to scan
ALL ports. Constant switching on and off of your monitor's relay will
eventually damage your monitor. If you are using the SCAN LIST option then
you should ensure that all the computers are active if you are using one of
these monitors.
If you choose to use the SCAN LIST option then you may define the computers to
be scanned in the following manner.
To define the autoscan list
Ensure that you are logged on as the ADMIN user.
From the main on-screen menu press F1 for MORE MENUS.
Select EDIT AUTOSCAN LIST from the menu. A list of defined computers will
appear. The starred computers will be autoscanned during the autoscan cycle.
To add a computer to the autoscan list, move the selection bar over the computer
name and press SPACE BAR. To add all named computers press F1. To remove
all named computers press F2.
When all the computers that you wish to scan have a star to the right hand side of