Filter
Top Products
LINDY CPU Switch Dual Junior Installation and Use Page 62
represent the firmware release version (e.g. 129 equals version 1.29).
3) A data file that tells the upgrade program (LYDJNR.EXE) which binary code files
(HEX files) to download to the LINDY CPU Switch Dual Junior and where to put
each file. Theoretically this DAT file can be modified so that only certain processors
are upgraded but do not do this unless specifically instructed by LINDY technical
support.
e.g. 216V129.DAT
Like the hex files, the first three digits represent the model number (e.g. 216
represents an LINDY CPU Switch Dual Junior model with 16 computer ports). The
next four digits represent the version number (e.g. V129 equals firmware version
1.29).
To upgrade the LINDY CPU Switch, check that the DAT file designation matches the
model that you have. In other words, if you have an LINDY CPU Switch Dual Junior
with 16 computer ports and you want to upgrade to version 1.30 then the DAT file
that you need would be named 216V130.DAT. Also check that all the required files
are loaded into the same directory on your computer. From that directory run the
upgrade file using the following command line.
LYDJNR {Dat_file_name}.DAT
Where {Dat_file_name} is the name of the required DAT file
For example, if the name of the required DAT file is 216V129.DAT then use the
following command line:
LYDJNR 216V129.DAT