Filter
Top Products
POD Farm 1.01 – Driver Panel & Recording
3•18
When POD Farm Standalone is not in use by the selected Line 6 device, this Input Source menu,
like the POD Farm Tone 1 Input Source menu, offers a list of input options. The options will differ
depending on the Line 6 device - (POD Studio and TonePort) UX2 displays the following:
When POD Farm Standalone is not
running, the Input Source Select menu
is available. As shown here, UX2 offers
several input Sources to choose from.
The selected Source is what gets routed
to the Device Sends.
GX, DI and GuitarPort devices are always “fixed” to only route their 1/4-inch input signals. With
one of these devices, this Input Source Select list offers only “Instrument” as the source.
POD X3 and PODxt devices are “fixed” to route their input signals. With one of these devices
there is no Source Select menu displayed in the dialog.
2 – Device Sends info box: One line for each Record Send appears here along with a general description
for each Send.
POD Studio, TonePort & GuitarPort devices (except UX8) show two stereo Sends (1-2 and
3-4):
The Device Sends description shows the
Input Source, and informs you if that signal
is “processed” or not. Since POD Farm
Standalone is not running, the signals are
unprocessed.