Filter
Top Products
Line 6 POD Farm 1.01 - POD Farm Plug-In
4•16
Model Bypass & Delete Controls - Hovering over or selecting a model within the SFV illuminates
the model, and a set of controls is displayed. Use these controls to bypass the model, or to remove it
completely from the Tone path.
Bypass Button Delete Button
Model Name
Moving Effects Models
Many POD Farm Effects models offer the ability to be placed either “Pre” or “Post” within the signal
chain (before or after the Amp model within the Tone path), which can offer slightly different sonic
results, depending on the effect and amp settings in use. To move an effect, simply click and drag it
left or right and you’ll see white arrows pointing downward, indicating the Pre and Post positions into
which the effect can be dropped. Note that when in Dual Tone mode, you can also drag any model
between Tones to copy the selected model into the other Tone path! For example, in the screen below,
the Tone 1 Analog Chorus modulation effect is being dragged from its original Tone 1 “Post” position
to the Tone 2 “Pre” position - this will copy the Analog Chorus, along with its current parameter
settings, into the Tone 2 signal path.
Dragging an effect to copy it from Tone 1 to Tone 2