Filter
Top Products
41
Appendix B: Installing a Second Hard Drive
EtherFast Network Attached Storage (120GB with PrintServer)
8. Insert a screw through the tray’s right side and into your hard drive. To tighten it and secure the drive to the
tray on the right side, you will need a narrow screwdriver that fits through the hole.
9. Slide the drive into the second drive bay.
10. Lock the tray into the Network Attached Storage’s bay. The tray must be locked in for the Network Attached
Storage to function properly.
11. Plug the power adapter into the Network Attached Storage. Then power it back on.
12. Open your networked computer’s web browser.
13. Enter http://192.168.1.77 in the Address field and press the Enter key.
Figure B-5: Insert Screw through
Right Side of Tray
Figure B-6: Access the Web-based Utility