Filter
Top Products
17
Chapter 8: Configuring the 10/100/1000 Gigabit Network Adapter in Windows Millennium or 98SE
Overview
10/100/1000 Gigabit Network Adapter
Chapter 8: Configuring the 10/100/1000 Gigabit Network
Adapter in Windows Millennium or 98SE
Overview
Linksys recommends that you use the default settings of the Adapter; however, if you wish to alter the default
settings, then follow these instructions to access the Adapter’s configuration in Windows Millennium or 98SE.
Accessing the Adapter’s Configuration
1. On your desktop, right-click My Computer and click Properties.
2. Click the Device Manager tab and then the + sign next to Network adapters. Click the Gigabit Network
Adapter, and click the Properties button.
3. The General tab will appear. Make changes to the Adapter’s configuration using this and three additional
tabs.
Adapter Configuration
The Adapter offers four configuration tabs: General, Driver, Resources, and Power Management.
General
You will be able to access the Device usage settings through this tab. Click the OK button to save any change.
Figure 8-2: General Tab for Windows Me or 98SE
Figure 8-1: Device Manager for Windows Me or 98SE