Filter
Top Products
20
Chapter 9: Using the EG1032 Instant Gigabit Network Adapter Diagnostic Utility
Overview
10/100/1000 Gigabit Network Adapter
Chapter 9: Using the EG1032 Instant Gigabit Network Adapter
Diagnostic Utility
Overview
Follow the instructions in this chapter to install and use the Diagnostic Utility.
Installing the Diagnostic Utility
1. Power on your computer.
2. Insert the Setup CD into your computer’s CD-ROM drive. After a few seconds, a screen will appear, showing
the Utility’s files. Select LinksysDiag_98_ME.exe if you are running Windows 98 or Window Me. Select
LinksysDiag_2k_XP if you are running Windows 2000 or Windows XP.
If this screen does not automatically appear after a few seconds, select Run from the Start menu and enter
d:\winutility in the field (if “D” is the letter of your CD-Rom drive).
3. The Welcome screen will appear to begin installing the Utility. To continue with the installation, click the Next
button. To close the installation program, click the Cancel button.
Figure 9-1: Select Windows Operating System
Figure 9-2: Welcome Screen