Filter
Top Products
27
Chapter 9: Using the EG1032 Instant Gigabit Network Adapter Diagnostic Utility
Using the Diagnostic Utility
10/100/1000 Gigabit Network Adapter
Cable
The Cable screen will display the length and status of the network cable attached to the adapter. Cable status is
displayed as follows:
Normal - The cable is connected and functioning normally.
Open - The cable is either not connected or not functioning properly.
Short - There is a short in the cable.
The Cable screen provides information about the Cable analysis is invalid in 10 Mbps speed.
Wake on LAN
Wake on LAN allows you to remotely wake up your PC, after it has gone into “Sleep Mode”, from anywhere on the
network. The Wake on LAN screen allows you to perform Wake on LAN on any PC equipped with the Adapter and
using the Utility. Enter either the PC’s Ethernet (or MAC) address, IP address, or NetBIOS name, and click the
Wake Up button.
Figure 9-18: The Utility’s Wake on LAN screen
Figure 9-17: The Utility’s Cable screen