Filter
Top Products
Fast Ethernet Switched 10/100 Network In a Box
26
Instant EtherFast
®
Series
25
6. Windows NT will probably ask you to supply your original Windows NT
CD-ROM or setup disks. Direct Windows NT to the proper location (most
likely D:\i386).
7. When Windows NT asks you
for the media type. Choose
the AutoSense option. When
finished, click on OK. Click
Close.
8. Click on the Protocols tab. Add any protocols you require by clicking the
Add button. (Refer to your Microsoft documentation if you have any ques-
tions on adding protocols.)
9. After your bindings, settings, and services are set, click the Close button.
NNoottee::
If you install the
TTCCPP//IIPP pprroottooccooll
, refer to
your system administrator or your Windows NT
documentation when installation steps that aren’t
listed in this User Guide appear. Linksys does
not provide technical support for the configura-
tion or troubleshooting of the TCP/IP protocol.
3. When the list of available LAN Cards appears, click the Have Disk button.
4. Put the EtherFast Card disk into drive A. Type a:\ into the box on your
screen and click OK.
5. Highlight the EtherFast 10/100 LAN Card entry in the window that
appears. Click OK.