Filter
Top Products
Fast Ethernet Switched 10/100 Network In a Box
38
Instant EtherFast
®
Series
37
Installing a 5.x Server
1. On the PC in which you installed the EtherFast card, simultaneously press
CTRL and ESC.
2. When the next screen pops up, select the number for System Console
and press Enter.
3. In the System Console prompt, load NWCONFIG by typing nwconfig
and hitting Enter.
4. Highlight Driver Options. Press Enter.
5. Highlight Configure network drivers. Press Enter.
6. Highlight Select a driver. Press Enter.
7. Press INS to Install an unlisted driver.
8. Press F3 to Specify a different path.
9. In the Specify a directory path box, type A:\NETWARE\SERVER\NW50
and press Enter.
10. In the next box, ensure that LNE100TX.LAN | EtherFast
®
10/100 LAN
Card is highlighted. Press Enter.
11. You will be asked Do you want to copy driver LNE100TX.LAN. Highlight
Ye s , then press Enter.
12. Files will begin copying to your hard drive. Afterwards, a Protocol and
Parameter screen will pop up. Highlight Select/Modify driver parame-
ters and protocol. Press Enter.
13. Arrow down the list that appears and choose which protocols you want to
install. Press F10 to save.
14. Highlight Save Parameters and Load Driver. Press Enter.
6. At the server command line, type (for example):
LOAD c:\LNE100TX\NBI31X.NLM
LOAD c:\LNE100TX\MSM31X.NLM
LOAD c:\LNE100TX\ETHERTSM.NLM
LOAD c:\LNE100TX\LNE100.LAN FRAME = <frame type
in use>
7. Bind a protocol to the driver. For example:
BIND IPX TO LNE100TX NET=XX
where XX is the logical network address for
your network. It can be any logical number.
The loading and binding are complete. The server is ready.
Installing a 4.x Server
1. At the NetWare prompt (indicated by the server name), run the
INSTALL.NLM program by typing load install.
2. Select Maintenance/Selective Install and press Enter.
3. Select LAN Driver Options and press Enter.
4. Press the Insert or Ins key on your keyboard to insert a new driver. Put the
EtherFast
®
10/100 LAN Card Disk into drive A.
5. Press F3 and specify the driver path. If the EtherFast Card disk is in drive
A, for example, type a:\netware\server\nw411 and press Enter. The pro-
gram will locate the EtherFast Card’s LNE100TX.LAN and
LNE100TX.LDI files on the disk.
6. The LNE100TX.LAN driver will appear as an option in the Select a LAN
Driver field. Choose this driver to start the loading and binding procedure.
7. Add the LOAD and BIND statements to your server's AUTOEXEC.NCF
file so that the LAN driver loads automatically each time your server is
started up.
The loading and binding are complete. The server is ready.
NNoottee::
You can save the LOAD
command line parameters in a
file with the name AUTOEX-
EC.NCF so they execute auto-
matically when the server
starts. See the Novell NetWare
386 v3.12 Installation Manual
for details on how to create
the AUTOEXEC.NCF file.