Filter
Top Products
Ethernet Configuration
This option allows you to choose the duplex and speed performance of the
HomeLink Card’s RJ-45 Ethernet port. In order to change the port settings, the
Mode Selection option must be set at 10BaseT Only, or 10/100BaseTX Only,
or the mode must be set at Auto Detect with a valid link on the 10BaseT Port.
• 10Mbps Half Duplex sets the 10BaseT port to half duplex mode. This is the
default setting.
• 10Mbps Full Duplex sets the 10BaseT port to full duplex mode.
page 33